Frequently asked Questions
Find out all the answers about our Light BMS.
You can save up to 50% on your energy costs. Right from the moment you install your Smart & Connective solution! But it’s safer to say that savings are about 20 to 35%.
You can save up to 50% on your energy costs. Right from the moment you install your Smart & Connective solution! But it’s safer to say that savings are about 20 to 35%.
Corrective action is immediate from the moment you program your scenarios. Energy savings are therefore also instantaneous.
While many solutions guarantee a return on investment of at least 24 to 48 months, your Smart & Connective solution will pay for itself in 12 to 18 months. But again, numbers depend on the building and equipments.
It takes about 30 minutes to equip a room (office, hotel room, etc.). The time spent on your installation therefore depends on the number of technicians your integrator mobilizes.
The integrator who installs Smart & Connective on your premises must be trained by us. However, if your electrician wishes, he can take this training to be authorized to install our solution.
The installation itself can be finalized if your wifi is not yet running, or if it cuts out regularly. This will have no impact on the progress of the setup. What’s more, once installed, your solution backs up everything in the cloud, so you can access your data even when you’re offline. CEOS, the brain of our solution, is capable of storing data for up to 3 weeks and synchronizing them as soon as the connection is restored. Your corrective measures continue to be effective even off-line, thanks to the PLC’s on-board intelligence.
In the Smart & Connective solution, there are no continuous waves. Our equipment only emits when it needs to transmit a new measurement or control the system. Moreover, the notion of the harmfulness of waves depends on their power, measured in milliwatts. We emit no more than 2 mW, whereas a cell phone emits an average of 125 mW, and a smartphone or connected tablet emits around 100 mW via WiFi.
The Smart & Connective solution is compatible with numerous references, always validated by our technical department. If you have any doubts, please do not hesitate to contact us.
Our network is protected and all data is encrypted. What’s more, there’s no link between your network and the Smart & Connective network, so your sensitive data is isolated and protected.
Thanks to the use of mesh network technologies, there are theoretically no limits. More generally, we’re talking about several hundred metres.
If you have a problem with your installation, you can contact your integrator directly, who will in most cases be able to help you remotely.
If you have a problem with your equipment, please contact us directly by e-mail at info@smartandconnective.com and we’ll get back to you as soon as possible. Our production is based in France, which means we can react quickly in the event of a faulty part.
To become a Smart & Connective integrator, all you have to do is take our two-day training course! For more information or to register, please contact us.
Our solution is what’s known as No-Code, which means you don’t need any programming skills. Once installed by your integrator, everything is already pre-configured. All you have to do is organize your dashboard. Our online portal has been designed to be ultra-simple and accessible to all!
The Smart & Connective solution is an affordable Light BMS that gives you a rapid return on investment (between 12 and 18 months). This makes it ideal even for small and medium-sized businesses, since it’s inexpensive and delivers immediate energy savings. What’s more, our Class A or B BMS allows you to benefit from CEE financing.
With Smart & Connective, you can save up to 50% on your energy consumption, right from the start. But generally we notice a 20 to 35% range for energy savings.
With Smart & Connective, you don’t need to change your heating or air-conditioning systems. Smart & Connective’s LightBMS is compatible with most HVAC systems. We work with the best IoT suppliers on the market to offer you a solution tailored to your existing installations. Last but not least, Smart & Connective’s Light BMS is non-intrusive and doesn’t require any work to be carried out, making it possible to work in old AND occupied buildings.
Smart & Connective’s Light BMS is a non-intrusive solution. Our connected objects are always discreet, so they blend in perfectly with your building without distorting it.
Smart & Connective’s Light BMS is a class A or B GTB, depending on the options chosen. This means it is eligible for the Certificats d’Economies d’Energie scheme, and more specifically the BAT-TH-116 form.